LAUNCH X431 Automotive OBD2 Scanner Check Car Engine Transmission SRS ABS Reset

Description

Store category
Sign Up Now !
You may also like
LAUNCH X431 Automotive OBD2 Scanner Check Car Engine Transmission SRS ABS Reset
Product Description
2020 New LAUNCH Creader VII+
, as an enhanced scan tool upgraded from basic OBDII/EOBD code readers, is capable of performing complete OBDII diagnostics for most 1996 and newer OBDII-compliant vehicles, and accessing Engine system, Transmission system, ABS, and SRS to troubleshoot and turn off system warning lights for most 2006 and newer domestic and foreign vehicles.
The LAUNCH Creader VII+ Scan Tool
4 Systems Diagnoses:
LAUNCH scan tool vii+ can read/erase codes, view live data stream and turn off the warning lights in the Engine system, Transmission system, ABS and SRS.
Full OBDII Functions:
The obd2 scanner features all 10 OBDII test modes, such as I/M Readiness, Live Data Stream (in graphic format), O2 Sensor Test, On-board Monitor Test, etc.
User-friendly Design:
LAUNCH scan tool Vii+ has an ergonomic handheld design with 3.5” TFT display, user-friendly button layout, and a wear-resistant housing, for simplicity and durability.
Fast and Intuitive Operations:
LAUNCH VII+ OBDII scanner has a fast and intuitive operation through an easy-to-use interface and responsive operating system.
Wide Compatibilities:
The obd2 scanner is compliant with all the OBDII protocols: J1859-41.6, J1850-10.4, ISO9141, KWP2000 (ISO14230), and CAN (Control Area Network ISO 11898).
Multilingual Built-in DTC Lookup:
LAUNCH VII+ is equipped with a built-in DTC library combined with multilingual menu, including English, Spanish, French, German, Italian, Russian, Japanese, and Portuguese.
Supports data recording and playing back.
Provides lifetime free online update service.
Engine/Transmission/ABS/SRS Diagnostics
For Engine System:
The scan tool LAUNCH creader vii+ can read/erase codes and view live data in the engine system to help you easily determine the cause of the warning light, and troubleshoot the issues, checking the engine real-time operating status, and turning off warning light to make sure the engine works properly.
For Auto Transmission System:
The OBD2 scanner reads and clears codes and views live data in transmission systems, and helps make adjustment to keep the transmission system’s output optimally adapted to the speed and load. Knowing the exact cause of a transmission’s woes means you can get it repaired as quickly as possible and at minimal expense to you.
For ABS (Anti-lock Braking System):
With this code reader, you can access the ABS reading and clearing DTCs and viewing real-time data flow in the system. It also supports performing various bi-directional tests to check the operating conditions of Anti-lock Braking System, and turn off the warning light.
For SRS (Airbag):
Read and clear fault code in SRS (Airbag) and turn off warning light of airbag for making sure engine work properly and safely. This scan tool allows you to read codes, clear codes, and read live data in Supplementary Restraint System (airbag) to ensure it works fine.
10 OBDII Test Modes
The LAUNCH obd2 scanner Creader VII+ is an enhanced scan tool specially designed for most 1996 and newer OBDII-compliant vehicles. Compared to basic OBD2 scanner/code readers, it provides complete OBDII diagnostics, including:
Read and Clear DTCs: Show the detailed description of the Diagnostic Trouble Code (DTC) and clear/reset the diagnostic information.
Read I/M Readiness Status: Show whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
Read Live Data Stream: Show the information of continuous data stream from vehicle in live graphic (waveform) display.
Read Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
O2 Sensor Test: Show the last results of O2 sensor test in graphic display for troubleshooting.
On-Board Monitor Test: Read the results of on-board diagnostic monitoring tests for specific components/systems.
Read Vehicle Information: Display the information such as VIN (Vehicle identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
How to Update This Scan Tool?
There are two methods to update the device: Update via TF card (strongly recommended) or update via USB cable.
Step 1:
Download and install the Creader VII+ Update tool (only under Window XP or Windows 7, Windows 8, Windows 10 (recommend updating it by card reader) operating system) on our official website (refer to the manual), and launch the program.
Step 2:
Enter the Product Serial Number (located at the back of the tool), and hit [Upgrade] and enter the register page, type your email address and "Register Code" (check the "Register Code" on the "Help--Tool Information" menu), then hit [Submit].
Step 3:
Install the TF card from the tool into the supplied USB TF card adapter and insert into the USB port of the computer.
Step 4:
Reopen the Creader VII+ Update tool, select the updates you would like to preform or click “Select All” and click Download to start downloading.
Step 5:
Reinsert the memory card into the device and reconnect the device to make sure it's updated successfully.
Extensive Vehicle Coverage
The scan tool has extensive vehicle compatibility with over 38 brands (one more brand added: Romeo, which is not available in CRP123), including: Infiniti, GM, USA-Ford, Suzuki, Mazda, Jaguar, Volvo, Renault, EURO-Ford, Toyota, Chrysler, Opel, Land Rover, Acura, Saab, JP Isuzu, Lexus, Romeo, Seat, Fiat, Benz, Peugeot, Citroen, Skoda, VW, Hyundai, Mitsubishi, Audi, Porsche, Subaru, Nissan, Honda, KIA, BMW, etc.
Real-time DataStream Analysis
The Creader VII+ obd2 scanner can read data streaming for OBDII / ENG / AT / ABS /SRS (Airbag), which shows the specific four systems live data readiness and allows you to focus on any suspicious or symptom-specific data parameters, especially in the display of waveform data stream visualization and historical data recording and reproduction. Tips: you can view live data stream in graphics, or read data stream by words and values.
Service of Test Results Printing
The code scanner is capable of connecting to a computer (via USB cable) to upload or print the diagnostic test results for your further analysis. If you switch on the Record Mode, the Creader VII+ can record the DTCs, Live Data Stream and Freeze Frames that are extremely useful for engine running condition analyzing.
Launch X431 Creader VII+ Support Car Models:
Asia Car Models:
for Suzuki, for Honda, for Mitsubishi, for Nissan, for Toyota, for Mazda, for Hyundai, for Kia, for Infiniti, for Lexus, for Accura, for Isuzu.
USA Car Models:
for Ford, for G-M, for Chrysler.
European Car Models:
for Benz, for BMW, for VW, for Opel, for Volvo, for Fiat, for Landrover, for Seat, for Skoda, for Audi, for Porsche, for Saab, for Jaguar.
Functions:
Applicable for all vehicles which match OBDII standard after 1996II
Supports all 10 test modes of the OBD
Display DTC help information and service information
Oxygen sensor test, carbon canister test
OBDII Data Stream Graphic Display
Cover more than 20 main car models in America, Europe and Asia Pacific regions
Can test Engine, Transmission, ABS and Airbag systems
Read DTC
Clear DTC
Read Dynamic Data Stream
Multi-languages
Support Online Upgrade
Parameter
Screen: 3.5 " TFT LCD Display
Input Voltage Range: 9-15 V
Connection: 16 - PIN DLC
Operating Temperature: 0 ~ 50oC (0oF ~ 122oF)
Storage Temperature: -20 ~ 70oC (-4oF ~ 150oF)
Package List:
1 * LAUNCH CRVII +
1 * OBDII
C
able
1 * USB Cable
1 * USB Sticker
1 * User Manual
1 * Carry
B
ox
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept PayPal payment.
Please contact us if you need to use another method to pay.
Payment should be made within
7 days
after bidding ends.
Otherwise a Unpaid Item case will be opened to you.
Delivery details
Shipping
Order will be shipped
within 1 business
day after payment confirmed.
We have warehouse in
USA，UK，HongKong，Australia，Russian，Germany
and China warehouse.
From our US/UK/RU/DE/AU warehouse via UPS or DHL eCommerce shipping
Delivery time varies from 2 to 6 business days.
From our Hong Kong warehouse via DHL or FedEx Ground
Delivery time varies from 3 to 5 business days.
From our China warehouse
For US buyers,
we use e-Packet (Delivery time is 5-12 business days) or express delivery(Delivery time is 3-7 business days) .
For other countries' buyers,
we use China Post or Hong Kong Post(Delivery time varies from 10 to 25 business days)or Express delivery(Delivery time is 3-7 business days).
We will ship according to your PayPal address.
Please make sure it is correct and include phone number for delivery
.
If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem.
Please include your special requests in eBay note if there is any.
Terms of sales
We are authorize distributor, our all items are 100% original and Our devices have warranty,
12 months free repair for the devices.
3 months for the accessories.
Please contact us firstly when you need warranty service.
In case an item arrives faulty, please contact us as soon as possible and keep it unused.
We will instruct you on how to return and get refund or replacement.
If the item has been used, we have the right to decline your claim.
Items should be returned on buyers' cost for repair or replacement.
About us
Who We Are?
We are specialized dealer of On-Board Diagnostic tools and automotive electronics
for more than 10 years.
We are authorized first class distributor of Launch, Autel, Ausdom, Caska and Ehang brands,
and more brands will be show in our store in near future.
What Do We Have?
We have office and warehouse in Australia and US to ensure fast shipment and after-sale service.
We have more than 50 employees devoting to customer satisfaction.
Terms of tax:
We are not responsible for buyer's
local taxes, please consult your local Customs for tax details.
Contact us
Our customer-oriented service strives for positive feedbacks with all 5 star selling ratings.
Please feel free to contact us via eBay message once you have any question before you giving us negative feedback or open case.
We will reply in 24 business hours.
Business time: GMT8 (9:00-18:00) from Monday to Friday.
Feedback